Book or article in a book
Article in a journal
Thesis, working paper, or technical report
If you are unable to locate any of these articles from your library etc. and would like a copy, please write to the author. Note that the names of authors in the MetaPHOR project are linked to their home pages: other authors' home pages may be found from our list of research contacts.
Aaen, I., Siltanen, A., Sørensen, C., Tahvanainen, V.-P., A Tale of Two Countries -
CASE experiences and expectations, in The Impact of Computer-Supported Technologies on
Information Systems Development, Kendall et al. (eds.), Elsevier North-Holland, pp. 61-94,
1992.
Araújo, T., Rossi, M.,
Process Models in MetaCASE Environments, in Procs. of the 4th Workshop on Next Generation
of CASE Tools, Brinkkemper et al. (eds.), Paris, pp. 89-100, June 1993.
Ashman, H., Balasubramanian, V., Oinas-Kukkonen,
H., ProceedingsThe Second International Workshop on Incorporating Hypertext
Functionality into Software Systems (HTF '96), in conjunction with ACM Conference on
Hypertext (HT '96), Washington, USA, March 20-24, 1996.
Brinkkemper S., Lyytinen K.,
Welke R., Method Engineering, Principles of Method Construction and Tool Support,
Chapman & Hall, 1996.
Garrido, A., Oinas-Kukkonen
H., On the Automatic and Hand-made Link Creation at the Information System Level
Functionality, Proceedings of the Second International Workshop in Incorporating Hypertext
Functionality into Software Systems (HTF '96), Ashman, H. et al (eds.) Washington, USA,
March, 1996.
Hirschheim, R., Klein, H., Lyytinen,
K. (eds.), Information Systems Development - Conceptual and Philosophical Foundations,
Cambridge University Press, 1995.
Huotari, J., Supporting
user's understanding of complex information spaces by advanced visualisation techniques.
STep'98 - Human and Artificial Information Processing, Jyväskylä, Finland, pp. 41-50,
1998.
Huotari, J., Kaipala J., Cognitive
aspects on IS Research, in Procs. of 17th Information Systems Research seminar In
Scandinavia IRIS, Part I, Käkölä et al. (eds.), 1999.
Iivari, J., Lyytinen, K., Rossi, M. (eds.), 7th International Conference of
Advanced Information Systems Engineering, CAiSE'95, Jyväskylä June 12-16,
Springer-Verlag, Lecture Notes in Computer Science N:o 932,Heidelberg, pp. 200-216, June
1995.
Jarke, M., Pohl, K., Weidenhaupt, K., Lyytinen, K., Marttiin, P., Tolvanen, J.-P. & Papazoglou, M., Meta
modeling: A formal basis for interoperability and adaptability. In B. Krämer & M.
Papazoglou (Eds.), Information Systems Interoperability, John Wiley Research Science
Press, 1998.
Kaipala, J., "Augmenting CASE Tools with Hypertext: Desired
Functionality and Implementation Issues", Proceedings of CAiSE '97, Barcelona,
Catalonia, Spain, June 16--20, Olivé and Pastor (Ed.), Springer, Berlin, pp. 217--230,
1997.
Kaipala, J., Navigation in Hypertext Functionality enabled
Environments: Issues and Considerations. Proceedings of the Third International Workshop
on Incorporating Hypertext Functionality Into Software Systems (HTF III), Hypertext '97
Conference, Southampton, UK, 1997.
Kaipala J., Huotari, J.,
Towards Advanced Visualisation Techniques in CASE: Initial Findings and Suggestions.
Information Systems Development - ISD'98, Bled, Slovenia, Plenum Publishing Corporation,
1998.
Kelly, S., A Matrix Editor
for a MetaCASE Environment, in Information and Software Technology, vol. 36 no. 6, June
1994.
Kelly, S., Tahvanainen, V-P., Support for Incremental Method
Engineering and MetaCASE, in Proceedings of the fifth workshop on the next generation of
CASE tools, B. Theodoulidis (ed.), Memoranda Informatica 94-25, University of Twente, NL,
pp. 140-148, 1994.
Kelly, S., Towards Better
MetaCASE and CAME Environments, Licentiate Thesis, Computer Science and Information
Systems Reports, Technical Reports TR-8, Univ. of Jyväskylä, Dept. of Computer Science
and Information Systems, 1995.
Kelly, S., What's in a
Relationship? On Distinguishing Property Holding and Object Binding, in Proceedings of
ISCO3, E. Falkenberg et al. (eds.), 1995.
Kelly, S., Smolander, K.,
Evolution and Issues in MetaCASE, in Information and Software Technology, vol. 38, no. 4,
pp. 261-266, 1996.
Kelly, S., Lyytinen, K., Rossi,
M., MetaEdit+: A Fully Configurable Multi-User and Multi-Tool CASE and CAME
Environment, in Proceedings of the 8th International Conference on Advanced Information
Systems Engineering, CAiSE'96, Heraklion, Crete, Greece, May 1996, Constantopoulos et al.
(eds.), Springer-Verlag, Lecture Notes in Computer Science N:o 1080, Heidelberg, pp. 1-21,
1996.
Kelly, S., "Towards a
Comprehensive MetaCASE and CAME Environment: Conceptual, Architectural, Functional and
Usability Advances in MetaEdit+", Ph.D. Thesis, Jyväskylä University, 1997. Abstract
Kelly, S., Rossi, M.,
"Differences in Method Engineering Performance with Graphical and Matrix Tools: A
Preliminary Empirical Study", Proceedings of 2nd CAiSE/IFIP8.1 International Workshop
on Evaluation of Modeling Methods in Systems Analysis and Design, EMMSAD'97, June 16--17,
Barcelona, Spain, Siau et al (Ed.), 1997.
Kelly, S., Rossi, M.,
Evaluating Method Engineer Performance: An Error Classification and Preliminary Empirical
Study, Australian Journal of Information Systems 6(1), 1998.
Kendall, J., Kerola, P., A Foundation for the Use of
Hypertext-based Documentation Techniques, in Journal of End User Computing, February 1994.
Kendall, K., Lyytinen, K.,
DeGross, J. (eds.), The Impact of Computer Supported Systems Development, IFIP WG 8.2,
North-Holland, 1992.
Kerola, P., Oinas-Kukkonen, H.,
Hypertext System as an Intermediary Agent in CASE Environments, in The Impact of
Computer-Supported Technologies on Information Systems Development, Kendall et al. (eds.),
Elsevier North-Holland, pp. 289-313, 1992.
Kinnunen K., Leppänen M., O-A matrix and a technique for
methodology engineering, in Proceedings of the Fourth International Conference on
Information Systems Development (ISD'94), Zupancic et al. (eds.), Bled, Slovenia, pp.
113-125, 1994.
Klein H, Lyytinen K.,
Towards a New Understanding of Data Modeling, in Software Development and Reality
Construction, Floyd et al. (eds.), Springer-Verlag, pp. 203-219, 1992.
Koskinen, M.,
Bringing Process Concepts Alive: On Designing Process Modelling Languages in a MetaCASE
Environment, Master's Thesis, Dept. of Computer Science and Information Systems, Univ. of
Jyväskylä, 1996.
Koskinen, M.,"Designing
Multiple Process Modellign Languages for Flexible, Enactable Process Models in a MetaCASE
Environment," Proceedings of the 7th European Workshop on Next Generation CASE Tools
(NGCT '96), Crete, Greece, Norwegian University of Science and Technology, Trondheim,
Norway, 1996.
Koskinen, M. and Marttiin, P., "Process Support in
MetaCASE: Implementing the Conceptual Basis for Enactable Process Models in
MetaEdit+", Proceedings of Software Engineering Environments, SEE'97, Gottbus,
Germany, Ebert and Lewerentz (Ed.), IEEE Computer Society Press, Los Alamitos, CA, pp.
110-123, 1997.
Koskinen, M.,
Beyond Process Modelling Languages: A Metamodelling Approach to Customizable Concepts and
Enactability in MetaCASE, a proposal for a licentiate thesis, In: J.-P. Tolvanen, A.
Winter (eds.) Proceedings of the 4th Doctoral Consortium on Advanced Information Systems
Engineering, Barcelona, Catalonia, 1997.
Koskinen, M. and Marttiin P., Developing a Customizable
Process Modelling Environment: Lessons Learnt and Future Prospects, In: V. Gruhn (ed.)
Procs. of 6th European Workshop on Software Process Technology, EWSPT'98, LNCS 1487.
Springer Verlag, pp. 13-27, 1998.
Koskinen, M., A
Metamodelling Approach to Process Concept Customisation and Enactability in MetaCASE ,
Licentiate Thesis, to appear in the series of Technical Reports, University of
Jyväskylä, Dept. of Computer Science and Information Systems, Jyväskylä, Finland,
1999.
Lehto, J., Principles and the Kernel of CyclicObjectMethodology, in
Procs. of 17th Information systems Research seminar In Scandinavia IRIS, Part II, Kerola
et al. (eds.), pp. 606-621, 1994.
Lehto, J., Cyclic Object Methodology and Environment for
Information System Evolution, Licentiate Thesis Research papers Series A 18, Dept. of
Information Processing Science, Univ. of Oulu, May 1993.
Liu, H., A Visual Approach to Querying the CASE Repository - A
Requirements Analysis, in Proceedings of the sixth Workshop on the next generation of CASE
tools, G. Grosz (ed.), Jyväskylä, Finland, pp. 143-160, June 1995.
Liu, H., A Visual Interface for Querying a CASE Repository, in
Proceedings of the 11th IEEE Symposium on Visual Languages, V. Haarslev (ed.), Darmstadt,
Germany, pp. 21-28, September 1995.
Lyytinen, K., Issues in
Developing Cooperative Development Environments, in Distributed Cooperation in Integrated
Information Systems, Procs. of the 3rd International Workshop on Intelligent and
Cooperative Information Systems, Ellis et al. (eds.), Aachener Informatik-Berichte nr.
92-18, 1992.
Lyytinen, K., Kendall K. E.,
Research Themes Encompassing Computer Supported Technologies for Information Systems
Development, in The Impact of Computer Supported Technologies on Information Systems,
Kendall et al. (eds.), North Holland, Amsterdam, pp. 1-21, 1992.
Lyytinen, K., Ngwenyama O.,
What does computer support for cooperative work mean? A Structurational analysis of
computer supported cooperative work, Accounting, Management and Information Technology,
vol. 2 no. 2, pp. 1-19, 1992.
Lyytinen, K., Tahvanainen, V.-P. (eds.), Next Generation CASE
Tools, IOS Press, 1992.
Lyytinen, K., Tahvanainen, V.-P., Introduction: Towards the
Next Generation of Computer Aided Software Engineering (CASE), in Next Generation CASE
Tools, Lyytinen et al. (eds.), IOS Press, pp. 1-7, 1992.
Lyytinen, K., Hirschheim R.,
Klein H., Exploring the intellectual structures of Information Systems Development: A
Social Action Theoretic Analysis, Accounting, Management and Information Technologies
(AMIT), Vol 6, No 1/2, pp. 1-64, (Special Issue: Research on System Development: Position
and Critiques), 1996
Lyytinen, K., Mathiassen,
L., Ropponen, J., A framework for software risk management , Journal of
Information Technology, vol 11, no 4, pp. 275-287, 1996.
Lyytinen, K., Kaipala, J., Kelly, S., Koskinen, M., Liu, H., Luoma, J.,
Marttiin, P., Pohjonen, R., Kukkonen, H. Oinas, Rossi, M., Somppi, M., Tahvanainen, V.-P.,
Tolvanen, J.-P., "CAMSO: Computer Aided Modelling Support for
Organisations", Technical Report TR-18, Department of Computer Science and
Information Systems, University of Jyväskylä, Finland, 1997.
Lyytinen, K., Marttiin, P., Tolvanen, J.-P., Jarke, M., Pohl, K. &
Weidenhaupt, K., Bridging the Islands of Automation. In: S.T. March & J. Bubenko
Jr. (eds) Proceedings of the Eight Annual Workshop on Information Technologies and Systems
(WITS’98). University of Jyväskylä. Computer Science and Information System
Reports, Technical Reports TR-19, 1998.
Lyytinen, K., Mathiassen,
L., Ropponen, J., Attention Shaping and Software Risk- A Categorical Analysis
of Four Classical Approaches, Information Systems Research, vol 9, No 3, pp. 233-255,
1998.
Lyytinen, K., Rose G., Welke
R., The Brave New World of Development in the internetwork computer architecture
(InterNCA): or how distributed computing platforms will change systems development,
Information Systems Journal, vol 8, no 3, pp. 241-253, 1998.
Lyytinen, K., Robey
D., Learning Failure in Information System Development, Information Systems Journal,
accepted for publication, 1999.
Lyytinen, K., Goodman S.,
Finland - the Unknown Soldier on the Information technology front, accepted for
publication, Communications of the ACM, 1999.
Marttiin, P., Lyytinen, K., Rossi,
M., Tahvanainen, V.-P., Smolander, K., Tolvanen, J.-P., Modeling Requirements for
Future CASE: Issues and Implementation Considerations, in Procs. of the 13th International
Conference on Information Systems, DeGross et al. (eds.), Dallas, Texas, pp. 9-20,
December 1992.
Marttiin, P., Rossi, M., Tahvanainen,
V.-P., Lyytinen, K., A comparative review
of CASE shells - a preliminary framework and research outcomes, Information &
Management, 25, pp. 11-31, 1993.
Marttiin, P.,
Methodology engineering in CASE shells: Design Issues and Current Practice, Licentiate
Thesis, Computer Science and Information Systems Reports, Technical Reports TR-4, Univ. of
Jyväskylä, Dept. of Computer Science and Information Systems, 1994.
Marttiin P.,
Towards flexible process support with a CASE shell, Advanced Information Systems
Engineering, Wijers et al. (eds.), Springer-Verlag, Lecture Notes in Computer Science No.
811, Berlin, pp. 14-27, June 1994.
Marttiin, P., Lyytinen, K., Rossi,
M., Tahvanainen, V.-P., Smolander, K., Tolvanen, J.-P., Modeling Requirements for
Future CASE: Issues and Implementation Considerations, Information Resources Management
Journal, vol. 8 no. 1, pp. 15-25, 1995.
Marttiin, P.,
Harmsen, F., Rossi, M., "A Functional
Framework for evaluating CAME environments: The Case of Maestro II/Decamerone and
MetaEdit+ assessment", IFIP WG 8.1/8.2 Working Conference on Principles of Method
Construction and Tool Support, Atlanta, USA, 26-28 August, 1996.
Marttiin, P.,
"Can Process-Centred Environments Provide the Customised Process Support Needed in
Metacase? A Literature Review", Proceedings of the First International Workshop on
the Many Facets of Process Engineering, 22-23.9.97, Gammarth, Tunisia, Grosz (Ed.),
Laboratoire PGL, Tunis, pp. 165--180, 1997
Marttiin, P., How
to Support CASE Activities through Customisable Process Models: Experiments of
CPME/MetaEdit+ Using VPL Formalism and ISPW-6 Example. In M. Khosrowpour (Ed.) Computer
Supported Organizational Work: Proceedings of the 5th International Conference on Software
Process. Hershey: Information Resources Management Association, 1998.
Marttiin, P., Customisable
Process Modelling Support and Tools for Design Environment. University of Jyväskylä.
Jyväskylä Studies in Computer Science, Economics and Statistics 43. PhD Thesis. 1998. Marttiin, P. and Koskinen, M., Similarities and Differences of
Method Engineering and Process Engineering Approaches, In: M. Khosrowpour (ed.) Effective
Utilization and Management of Emerging Information Technologies, Idea Group Publishing,
pp. 420-424, 1998.
Oinas-Kukkonen, H.,
Adaptability by Way of Hypertext, in Meeting of Minds, The proceedings of the
KnowledgeWare 1994 International User Conference, Atlanta, Georgia, USA, April 10-13, pp.
120-127, 1994.
Oinas-Kukkonen, H., Debate
Browser - An Argumentation Tool for MetaEdit+ Environment, Proceedings of the Seventh
European Workshop on the Next Generation of CASE Tools (NGCT '96), Crete, Greece, May
1996. (a)
Oinas-Kukkonen, H.,
Empowering the Components and Use of CASE Environments with Hypertext, in Proceedings of
the 2nd Golden West International Conference on Intelligent Systems, Reno, Nevada, pp.
201-205, June 1992.
Oinas-Kukkonen, H., Hypermedia
Functionality in Modelling Tools, Proceedings of the Second International Workshop on
Incorporating Hypertext Functionality into Software Systems (HTF '96), Ashman, H. et al
(eds.) Washington, USA, March 1996.
Oinas-Kukkonen, H.,
Hypertext Approach into Object Orientation, in Proceedings of the 15th IRIS, Bjerknes et
al. (eds.), Dept. of Informatics, Univ. of Oslo, Norway, pp. 730-741, August 1992.
Oinas-Kukkonen, H.,
Intermediary Hypertext Systems in CASE Environments, Licentiate Thesis, Research papers
Series A 16, Dept. of Information Processing Science, Univ. of Oulu, May 1993.
Oinas-Kukkonen, H., Kaipala,
J., Re-engineering Legacy Systems to Add Hypermedia Functionality, Proceedings of the
Second International Workshop on Incorporating Hypertext Functionality into Software
Systems (HTF '96), Ashman, H. et al (eds.), Washington, USA, March 1996.
Oinas-Kukkonen, H.,
Lessons Learned from Developing Hypertext Applications, in Information Systems Design and
Hypermedia, C. Chrisment (ed.), Cepadues-Editions, Tolouse, France, pp. 255-261, 1994.
Oinas-Kukkonen, H., Method
Rationale in Method Engineering and Use, Proceedings of IFIP WG 8.1/8.2 Working Conference
on Principles on Method Construction and Tool Support (Method Engineering 96), Atlanta,
USA, August 1996.
Rask, R., Laamanen P., Lyytinen
K., A Comparison of Albrecht's Function Point and Symons' Mark II Metrics, in
Proceedings of the 13th ICIS, DeGross et al. (eds), pp. 207-222, 1992
Rask, R., Laamanen, P., Lyytinen,
K., Automatic Derivation and Comparison of Specification Level Software Product
Metrics in a CASE environment, IEEE Transactions on Software Engineering, vol. 19 no. 7,
pp. 661-671, July 1993.
Rossi, M., CAME Tools for
MetaEdit, Licentiate Thesis, Computer Science and Information Systems Reports, Technical
Reports TR-9, Univ. of Jyväskylä, Dept. of Computer Science and Information Systems,
1995.
Rossi, M., CAME tools for
MetaEdit, Proceedings
of MetaCASE -95, Sunderland University Press, January 5-7, 1995.
Rossi, M., "Evolution of
OO methods: The Unified Case", Proceedings workshop of Evaluation of Modeling Methods
in Systems Analysis and Design, Wand, Siau Y., (eds.), to appear.
Rossi, M., Workshop report of
the ECOOP -92 Workshop W3 "CASE for Object-Oriented methods", to appear in
SIGPLAN Notices.
Rossi, M., Brinkkemper, S., "Complexity
Metrics for Systems Development Methods and Techniques", Information Systems, 20(2):
209-227, 1996.
Rossi, M., Brinkkemper, S., Metrics
in Method Engineering, Proceedings of the 7th International Conference on Advanced
Information Systems Engineering, CAiSE'95, Jyväskylä, June 12-16, Iivari et al. (eds.),
Springer-Verlag, Lecture Notes in Computer Science N:o 932, Heidelberg, pp. 200-216, June
1995.
Rossi, M., Gustafsson, M.,
Smolander, K., Johansson, L.-Å., Lyytinen, K.,
Metamodeling Editor as a Front End for CASE shell, Advanced Information Systems
Engineering, P. Loucopoulos (ed.), Springer-Verlag, Lecture Notes in Computer Science
#593, Berlin, pp. 546-567, May 1992.
Rossi, M.,
Kelly, S., "Construction of a CASE tool: the case for MetaEdit+",
Proceedings of The First International Symposium on Constructing Software Engineering
Tools (CoSET'99), 17-18 May, Los Angeles, 1999
Rossi, M., Tolvanen, J-P. (1995), "Using Reusable
Frameworks in Development of a Method Support Environment", Proceedings of the WITS
1995, Vol. 95 N:o15 pp. 240-249, RTWH Aachen, 1995.
Rossi, M., Tolvanen, J.-P.,
"Metamodeling approach to method comparison: A survey of a set of ISD methods",
Working Paper WP-34, Dept. of Computer Science and Information Systems, University of
Jyväskylä, Finland, 1996
Siau, K., Rossi, M.,
Evaluating Information Modeling Methods - a Review, HICSS-31, Big Island, HI, IEEE
Computer Society, 1998.
Smolander, K., Metamodels in CASE Environments, Licentiate Thesis,
Computer Science Reports, Working Paper WP-20, Univ. of Jyväskylä, December 1991.
Tolvanen, J.-P.,
Incremental method development for business modeling: an action research case study,
Proceeding of 6th workshop on Next Generation CASE Tools, G. Grosz (ed.), University of
Paris-1, pp. 79-98, 1995.
Tolvanen, J.-P., Lyytinen, K., Flexible method adaptation in
CASE environments - The metamodeling approach. Scandinavian Journal of Information
Systems, vol. 5, pp. 51-77, 1993.
Tolvanen, J.-P., Lyytinen, K., Modeling Information Systems in
Business Processing: Alternative perspectives on business process re-engineering,
Proceedings of the IFIP TC8 Open Conference on Business Process Re-engineering:
Information Systems Opportunities and Challenges, Glasson et al. (eds.), Gold Coast,
Queensland, Australia, May 8-11, 1994.
Tolvanen, J.-P., Marttiin, P., Smolander, K., An Integrated
Model for Information Systems Modeling, in Procs. of the 26th annual Hawaii International
Conference on Systems Science vol. 3, Nunamaker. et al. (eds.), IEEE Computer Society
Press, USA, pp. 470-479, January 1993.
Tolvanen, J.-P.,
Methodology engineering in CASE: towads an incremental approach, Licentiate thesis,
Computer Science and Information Systems Reports TR-5, University of Jyväskylä, 1994.
Tolvanen, J.-P., Rossi, M., Liu, H., "Method Engineering:
Current research directions and implications for future research", Method
Engineering, Principles of Method Construction and Support. S. Brinkkemper, K. Lyytinen
and R. Welke, Chapman-Hall: 296-317, 1996.
Tolvanen, J.-P., Rossi, M., Marttiin,
P., Comparison of Three Object-Oriented Methods; a Method Adaptation Perspective, in
CASE for Object-Oriented Methods - Position papers of the ECOOP'92 WorkShop W3, M. Rossi
(ed.), Working Paper WP22, Department of Computer Science and Information Systems,
University of Jyväskylä, Finland, pp. 38-43, 1992.
Tolvanen, J.-P., M. Jarke, K.
Pohl, K. Weidenhaupt, K. Lyytinen, P. Marttiin, Meta modeling: A formal basis for
interoperability and adaptability. In: Information Systems Interoperability (eds. B.
Krämer et al). John Wiley and Sons, 1998.
Tolvanen, J.-P., K. Lyytinen, P. Marttiin, M. Jarke, K. Pohl, K. Weidenhaupt,
CASE Environment Adaptability: Bridging the Islands of Automation", Proceedings of
the 8th Annual Workshop on Information Technologies and Systems (WITS’98) (eds. S.
March, J. Bubenko), Computer Science and Information System Reports, TR-19, University of
Jyväskylä, pp. 115-126, 1998.
Tolvanen, J.-P., Incremental
Method Engineering with Modeling Tools: Theoretical Principles and Empirical
Evidence" (Phd thesis), Jyväskylä Studies in Computer Science, Economics and
Statistics, Jyväskylä: University of Jyväskylä, p. 301, 1998.
Zhang, Z., Methodology Engineering Based
Component Reuse in a MetaCASE Environment. Master Thesis, University of Jyväskylä,
Jyväskylä, Finland, 1998.
Home Page
Pages created originally by Steven Kelly. Last
update September 20, 1999 by Koskinen and Jouni
Huotari.