Book or article in a book
Article in a journal
Thesis, working paper, or technical report
If you are unable to locate any of these articles from your library etc. and would like a copy, please write to the author. Note that the names of authors in the MetaPHOR project are linked to their home pages: other authors' home pages may be found from our list of research contacts.
Aaen, I., Siltanen, A., Sørensen, C., Tahvanainen,
V.-P., A Tale of Two Countries - CASE experiences and expectations,
in The Impact of Computer-Supported Technologies on Information Systems
Development, Kendall et al. (eds.), Elsevier North-Holland, pp. 61-94,
1992.
Araújo, T., Rossi, M.,
Process Models in MetaCASE Environments, in Procs. of the 4th Workshop
on Next Generation of CASE Tools, Brinkkemper et al. (eds.), Paris, pp.
89-100, June 1993.
Ashman, H., Balasubramanian, V., Oinas-Kukkonen,
H., ProceedingsThe Second International Workshop on Incorporating Hypertext
Functionality into Software Systems (HTF '96), in conjunction with ACM
Conference on Hypertext (HT '96), Washington, USA, March 20-24, 1996.
Brinkkemper S., Lyytinen K.,
Welke R., Method Engineering, Principles of Method Construction and
Tool Support, Chapman & Hall, 1996.
Garrido, A., Oinas-Kukkonen H.,
On the Automatic and Hand-made Link Creation at the Information System
Level Functionality, Proceedings of the Second International Workshop in
Incorporating Hypertext Functionality into Software Systems (HTF '96),
Ashman, H. et al (eds.) Washington, USA, March, 1996.
Hirschheim, R., Klein, H., Lyytinen,
K. (eds.), Information Systems Development - Conceptual and Philosophical
Foundations, Cambridge University Press, 1995.
Huotari, J., Supporting
user's understanding of complex information spaces by advanced visualisation
techniques. STep'98 - Human and Artificial Information Processing, Jyväskylä,
Finland, pp. 41-50, 1998.
Huotari, J., Kaipala J., Cognitive
aspects on IS Research, in Procs. of 17th Information Systems Research
seminar In Scandinavia IRIS, Part I, Käkölä et al. (eds.),
1999.
Iivari, J., Lyytinen, K., Rossi,
M. (eds.), 7th International Conference of Advanced Information Systems
Engineering, CAiSE'95, Jyväskylä June 12-16, Springer-Verlag,
Lecture Notes in Computer Science N:o 932,Heidelberg, pp. 200-216, June
1995.
Jarke, M., Pohl, K., Weidenhaupt, K., Lyytinen,
K., Marttiin, P., Tolvanen,
J.-P. & Papazoglou, M., Meta modeling: A formal basis for interoperability
and adaptability. In B. Krämer & M. Papazoglou (Eds.), Information
Systems Interoperability, John Wiley Research Science Press, 1998.
Kaipala, J., "Augmenting CASE Tools with Hypertext: Desired Functionality
and Implementation Issues", Proceedings of CAiSE '97, Barcelona, Catalonia,
Spain, June 16--20, Olivé and Pastor (Ed.), Springer, Berlin, pp.
217--230, 1997.
Kaipala, J., Navigation in Hypertext Functionality enabled Environments:
Issues and Considerations. Proceedings of the Third International Workshop
on Incorporating Hypertext Functionality Into Software Systems (HTF III),
Hypertext '97 Conference, Southampton, UK, 1997.
Kaipala J., Huotari, J.,
Towards Advanced Visualisation Techniques in CASE: Initial Findings and
Suggestions. Information Systems Development - ISD'98, Bled, Slovenia,
Plenum Publishing Corporation, 1998.
Kelly, S., A Matrix Editor
for a MetaCASE Environment, in Information and Software Technology, vol.
36 no. 6, June 1994.
Kelly, S., Tahvanainen,
V-P., Support for Incremental Method Engineering and MetaCASE, in Proceedings
of the fifth workshop on the next generation of CASE tools, B. Theodoulidis
(ed.), Memoranda Informatica 94-25, University of Twente, NL, pp. 140-148,
1994.
Kelly, S., Towards Better MetaCASE
and CAME Environments, Licentiate Thesis, Computer Science and Information
Systems Reports, Technical Reports TR-8, Univ. of Jyväskylä,
Dept. of Computer Science and Information Systems, 1995.
Kelly, S., What's in a Relationship?
On Distinguishing Property Holding and Object Binding, in Proceedings of
ISCO3, E. Falkenberg et al. (eds.), 1995.
Kelly, S., Smolander, K., Evolution
and Issues in MetaCASE, in Information and Software Technology, vol. 38,
no. 4, pp. 261-266, 1996.
Kelly, S., Lyytinen,
K., Rossi, M., MetaEdit+: A Fully
Configurable Multi-User and Multi-Tool CASE and CAME Environment, in Proceedings
of the 8th International Conference on Advanced Information Systems Engineering,
CAiSE'96, Heraklion, Crete, Greece, May 1996, Constantopoulos et al. (eds.),
Springer-Verlag, Lecture Notes in Computer Science N:o 1080, Heidelberg,
pp. 1-21, 1996.
Kelly, S., "Towards a
Comprehensive MetaCASE and CAME Environment: Conceptual, Architectural,
Functional and Usability Advances in MetaEdit+", Ph.D. Thesis, Jyväskylä
University, 1997. Abstract
Kelly, S., Rossi, M., "Differences
in Method Engineering Performance with Graphical and Matrix Tools: A Preliminary
Empirical Study", Proceedings of 2nd CAiSE/IFIP8.1 International Workshop
on Evaluation of Modeling Methods in Systems Analysis and Design, EMMSAD'97,
June 16--17, Barcelona, Spain, Siau et al (Ed.), 1997.
Kelly, S., Rossi, M., Evaluating
Method Engineer Performance: An Error Classification and Preliminary Empirical
Study, Australian Journal of Information Systems 6(1), 1998.
Kendall, J., Kerola, P., A Foundation for the Use of Hypertext-based
Documentation Techniques, in Journal of End User Computing, February 1994.
Kendall, K., Lyytinen, K., DeGross,
J. (eds.), The Impact of Computer Supported Systems Development, IFIP
WG 8.2, North-Holland, 1992.
Kerola, P., Oinas-Kukkonen, H.,
Hypertext System as an Intermediary Agent in CASE Environments, in The
Impact of Computer-Supported Technologies on Information Systems Development,
Kendall et al. (eds.), Elsevier North-Holland, pp. 289-313, 1992.
Kinnunen K., Leppänen M., O-A matrix and a technique for methodology
engineering, in Proceedings of the Fourth International Conference on Information
Systems Development (ISD'94), Zupancic et al. (eds.), Bled, Slovenia, pp.
113-125, 1994.
Klein H, Lyytinen K., Towards
a New Understanding of Data Modeling, in Software Development and Reality
Construction, Floyd et al. (eds.), Springer-Verlag, pp. 203-219, 1992.
Koskinen,
M., Bringing Process Concepts Alive: On Designing Process Modelling
Languages in a MetaCASE Environment, Master's Thesis, Dept. of Computer
Science and Information Systems, Univ. of Jyväskylä, 1996.
Koskinen, M.,"Designing
Multiple Process Modellign Languages for Flexible, Enactable Process Models
in a MetaCASE Environment," Proceedings of the 7th European Workshop
on Next Generation CASE Tools (NGCT '96), Crete, Greece, Norwegian University
of Science and Technology, Trondheim, Norway, 1996.
Koskinen, M. and Marttiin,
P., "Process Support in MetaCASE: Implementing the Conceptual
Basis for Enactable Process Models in MetaEdit+", Proceedings of Software
Engineering Environments, SEE'97, Gottbus, Germany, Ebert and Lewerentz
(Ed.), IEEE Computer Society Press, Los Alamitos, CA, pp. 110-123, 1997.
Koskinen, M., Beyond Process
Modelling Languages: A Metamodelling Approach to Customizable Concepts
and Enactability in MetaCASE, a proposal for a licentiate thesis, In: J.-P.
Tolvanen, A. Winter (eds.) Proceedings of the 4th Doctoral Consortium on
Advanced Information Systems Engineering, Barcelona, Catalonia, 1997.
Koskinen, M. and Marttiin
P., Developing a Customizable Process Modelling Environment: Lessons
Learnt and Future Prospects, In: V. Gruhn (ed.) Procs. of 6th European
Workshop on Software Process Technology, EWSPT'98, LNCS 1487. Springer
Verlag, pp. 13-27, 1998.
Koskinen,
M., A Metamodelling Approach to Process Concept Customisation and Enactability
in MetaCASE , Licentiate Thesis, to appear in the series of Technical Reports,
University of Jyväskylä, Dept. of Computer Science and Information
Systems, Jyväskylä, Finland, 1999.
Lehto, J., Principles and the Kernel of CyclicObjectMethodology, in
Procs. of 17th Information systems Research seminar In Scandinavia IRIS,
Part II, Kerola et al. (eds.), pp. 606-621, 1994.
Lehto, J., Cyclic Object Methodology and Environment for Information
System Evolution, Licentiate Thesis Research papers Series A 18, Dept.
of Information Processing Science, Univ. of Oulu, May 1993.
Liu, H., A Visual Approach to Querying the CASE Repository - A Requirements
Analysis, in Proceedings of the sixth Workshop on the next generation of
CASE tools, G. Grosz (ed.), Jyväskylä, Finland, pp. 143-160,
June 1995.
Liu, H., A Visual Interface for Querying a CASE Repository, in Proceedings
of the 11th IEEE Symposium on Visual Languages, V. Haarslev (ed.), Darmstadt,
Germany, pp. 21-28, September 1995.
Lyytinen, K., Issues in
Developing Cooperative Development Environments, in Distributed Cooperation
in Integrated Information Systems, Procs. of the 3rd International Workshop
on Intelligent and Cooperative Information Systems, Ellis et al. (eds.),
Aachener Informatik-Berichte nr. 92-18, 1992.
Lyytinen, K., Kendall K. E.,
Research Themes Encompassing Computer Supported Technologies for Information
Systems Development, in The Impact of Computer Supported Technologies on
Information Systems, Kendall et al. (eds.), North Holland, Amsterdam, pp.
1-21, 1992.
Lyytinen, K., Ngwenyama O.,
What does computer support for cooperative work mean? A Structurational
analysis of computer supported cooperative work, Accounting, Management
and Information Technology, vol. 2 no. 2, pp. 1-19, 1992.
Lyytinen, K., Tahvanainen,
V.-P. (eds.), Next Generation CASE Tools, IOS Press, 1992.
Lyytinen, K., Tahvanainen,
V.-P., Introduction: Towards the Next Generation of Computer Aided
Software Engineering (CASE), in Next Generation CASE Tools, Lyytinen et
al. (eds.), IOS Press, pp. 1-7, 1992.
Lyytinen, K., Hirschheim R.,
Klein H., Exploring the intellectual structures of Information Systems
Development: A Social Action Theoretic Analysis, Accounting, Management
and Information Technologies (AMIT), Vol 6, No 1/2, pp. 1-64, (Special
Issue: Research on System Development: Position and Critiques), 1996
Lyytinen, K., Mathiassen, L.,
Ropponen, J., A framework for software risk management , Journal
of Information Technology, vol 11, no 4, pp. 275-287, 1996.
Lyytinen, K., Kaipala, J., Kelly, S., Koskinen, M., Liu, H., Luoma, J.,
Marttiin, P., Pohjonen, R., Kukkonen, H. Oinas, Rossi, M., Somppi, M.,
Tahvanainen, V.-P., Tolvanen, J.-P., "CAMSO: Computer Aided Modelling
Support for Organisations", Technical Report TR-18, Department of
Computer Science and Information Systems, University of Jyväskylä,
Finland, 1997.
Lyytinen, K., Marttiin,
P., Tolvanen, J.-P., Jarke, M.,
Pohl, K. & Weidenhaupt, K., Bridging the Islands of Automation.
In: S.T. March & J. Bubenko Jr. (eds) Proceedings of the Eight Annual
Workshop on Information Technologies and Systems (WITS’98). University
of Jyväskylä. Computer Science and Information System Reports,
Technical Reports TR-19, 1998.
Lyytinen, K., Mathiassen, L.,
Ropponen, J., Attention Shaping and Software Risk- A Categorical
Analysis of Four Classical Approaches, Information Systems Research, vol
9, No 3, pp. 233-255, 1998.
Lyytinen, K., Rose G., Welke
R., The Brave New World of Development in the internetwork computer
architecture (InterNCA): or how distributed computing platforms will change
systems development, Information Systems Journal, vol 8, no 3, pp. 241-253,
1998.
Lyytinen, K., Robey D.,
Learning Failure in Information System Development, Information Systems
Journal, accepted for publication, 1999.
Lyytinen, K., Goodman S.,
Finland - the Unknown Soldier on the Information technology front, accepted
for publication, Communications of the ACM, 1999.
Marttiin, P., Lyytinen,
K., Rossi, M., Tahvanainen,
V.-P., Smolander, K., Tolvanen,
J.-P., Modeling Requirements for Future CASE: Issues and Implementation
Considerations, in Procs. of the 13th International Conference on Information
Systems, DeGross et al. (eds.), Dallas, Texas, pp. 9-20, December 1992.
Marttiin,
P., Rossi, M., Tahvanainen,
V.-P., Lyytinen, K., A comparative
review of CASE shells - a preliminary framework and research outcomes,
Information & Management, 25, pp. 11-31, 1993.
Marttiin, P., Methodology
engineering in CASE shells: Design Issues and Current Practice, Licentiate
Thesis, Computer Science and Information Systems Reports, Technical Reports
TR-4, Univ. of Jyväskylä, Dept. of Computer Science and Information
Systems, 1994.
Marttiin P., Towards flexible
process support with a CASE shell, Advanced Information Systems Engineering,
Wijers et al. (eds.), Springer-Verlag, Lecture Notes in Computer Science
No. 811, Berlin, pp. 14-27, June 1994.
Marttiin, P., Lyytinen,
K., Rossi, M., Tahvanainen,
V.-P., Smolander, K., Tolvanen,
J.-P., Modeling Requirements for Future CASE: Issues and Implementation
Considerations, Information Resources Management Journal, vol. 8 no. 1,
pp. 15-25, 1995.
Marttiin, P., Harmsen, F.,
Rossi, M., "A Functional
Framework for evaluating CAME environments: The Case of Maestro II/Decamerone
and MetaEdit+ assessment", IFIP WG 8.1/8.2 Working Conference on Principles
of Method Construction and Tool Support, Atlanta, USA, 26-28 August, 1996.
Marttiin, P., "Can
Process-Centred Environments Provide the Customised Process Support Needed
in Metacase? A Literature Review", Proceedings of the First International
Workshop on the Many Facets of Process Engineering, 22-23.9.97, Gammarth,
Tunisia, Grosz (Ed.), Laboratoire PGL, Tunis, pp. 165--180, 1997
Marttiin, P., How to Support
CASE Activities through Customisable Process Models: Experiments of CPME/MetaEdit+
Using VPL Formalism and ISPW-6 Example. In M. Khosrowpour (Ed.) Computer
Supported Organizational Work: Proceedings of the 5th International Conference
on Software Process. Hershey: Information Resources Management Association,
1998.
Marttiin, P., Customisable
Process Modelling Support and Tools for Design Environment. University
of Jyväskylä. Jyväskylä Studies in Computer Science,
Economics and Statistics 43. PhD Thesis. 1998.
Marttiin, P. and Koskinen,
M., Similarities and Differences of Method Engineering and Process
Engineering Approaches, In: M. Khosrowpour (ed.) Effective Utilization
and Management of Emerging Information Technologies, Idea Group Publishing,
pp. 420-424, 1998.
Oinas-Kukkonen, H., Adaptability
by Way of Hypertext, in Meeting of Minds, The proceedings of the KnowledgeWare
1994 International User Conference, Atlanta, Georgia, USA, April 10-13,
pp. 120-127, 1994.
Oinas-Kukkonen, H., Debate
Browser - An Argumentation Tool for MetaEdit+ Environment, Proceedings
of the Seventh European Workshop on the Next Generation of CASE Tools (NGCT
'96), Crete, Greece, May 1996. (a)
Oinas-Kukkonen, H., Empowering
the Components and Use of CASE Environments with Hypertext, in Proceedings
of the 2nd Golden West International Conference on Intelligent Systems,
Reno, Nevada, pp. 201-205, June 1992.
Oinas-Kukkonen, H., Hypermedia
Functionality in Modelling Tools, Proceedings of the Second International
Workshop on Incorporating Hypertext Functionality into Software Systems
(HTF '96), Ashman, H. et al (eds.) Washington, USA, March 1996.
Oinas-Kukkonen, H., Hypertext
Approach into Object Orientation, in Proceedings of the 15th IRIS, Bjerknes
et al. (eds.), Dept. of Informatics, Univ. of Oslo, Norway, pp. 730-741,
August 1992.
Oinas-Kukkonen, H., Intermediary
Hypertext Systems in CASE Environments, Licentiate Thesis, Research papers
Series A 16, Dept. of Information Processing Science, Univ. of Oulu, May
1993.
Oinas-Kukkonen, H., Kaipala, J.,
Re-engineering Legacy Systems to Add Hypermedia Functionality, Proceedings
of the Second International Workshop on Incorporating Hypertext Functionality
into Software Systems (HTF '96), Ashman, H. et al (eds.), Washington, USA,
March 1996.
Oinas-Kukkonen, H., Lessons
Learned from Developing Hypertext Applications, in Information Systems
Design and Hypermedia, C. Chrisment (ed.), Cepadues-Editions, Tolouse,
France, pp. 255-261, 1994.
Oinas-Kukkonen, H., Method
Rationale in Method Engineering and Use, Proceedings of IFIP WG 8.1/8.2
Working Conference on Principles on Method Construction and Tool Support
(Method Engineering 96), Atlanta, USA, August 1996.
Rask, R., Laamanen P., Lyytinen
K., A Comparison of Albrecht's Function Point and Symons' Mark II Metrics,
in Proceedings of the 13th ICIS, DeGross et al. (eds), pp. 207-222, 1992
Rask, R., Laamanen, P., Lyytinen,
K., Automatic Derivation and Comparison of Specification Level Software
Product Metrics in a CASE environment, IEEE Transactions on Software Engineering,
vol. 19 no. 7, pp. 661-671, July 1993.
Rossi, M., "Evolution of
OO methods: The Unified Case", Proceedings workshop of Evaluation
of Modeling Methods in Systems Analysis and Design, Wand, Siau Y., (eds.),
to appear.
Rossi, M., Brinkkemper, S., "Complexity
Metrics for Systems Development Methods and Techniques", Information
Systems, 20(2): 209-227, 1996.
Rossi, M., Brinkkemper, S., Metrics
in Method Engineering, Proceedings of the 7th International Conference
on Advanced Information Systems Engineering, CAiSE'95, Jyväskylä,
June 12-16, Iivari et al. (eds.), Springer-Verlag, Lecture Notes in Computer
Science N:o 932, Heidelberg, pp. 200-216, June 1995.
Rossi, M., CAME Tools for MetaEdit,
Licentiate Thesis, Computer Science and Information Systems Reports, Technical
Reports TR-9, Univ. of Jyväskylä, Dept. of Computer Science and
Information Systems, 1995.
Rossi, M., CAME tools for MetaEdit,
Proceedings
of MetaCASE -95, Sunderland University Press, January 5-7, 1995.
Rossi, M., Gustafsson, M., Smolander,
K., Johansson, L.-Å., Lyytinen,
K., Metamodeling Editor as a Front End for CASE shell, Advanced Information
Systems Engineering, P. Loucopoulos (ed.), Springer-Verlag, Lecture Notes
in Computer Science #593, Berlin, pp. 546-567, May 1992.
Rossi, M., Tolvanen,
J-P. (1995), "Using Reusable Frameworks in Development of a Method
Support Environment", Proceedings of the WITS 1995, Vol. 95 N:o15
pp. 240-249, RTWH Aachen, 1995.
Rossi, M., Workshop report of
the ECOOP -92 Workshop W3 "CASE for Object-Oriented methods",
to appear in SIGPLAN Notices.
Rossi, M., Tolvanen, J.-P., "Metamodeling
approach to method comparison: A survey of a set of ISD methods",
Working Paper WP-34, Dept. of Computer Science and Information Systems,
University of Jyväskylä, Finland, 1996
Siau, K., Rossi, M., Evaluating
Information Modeling Methods - a Review, HICSS-31, Big Island, HI, IEEE
Computer Society, 1998.
Smolander, K., Metamodels in CASE Environments, Licentiate Thesis,
Computer Science Reports, Working Paper WP-20, Univ. of Jyväskylä,
December 1991.
Tolvanen, J.-P., Incremental
method development for business modeling: an action research case study,
Proceeding of 6th workshop on Next Generation CASE Tools, G. Grosz (ed.),
University of Paris-1, pp. 79-98, 1995.
Tolvanen, J.-P., Lyytinen,
K., Flexible method adaptation in CASE environments - The metamodeling
approach. Scandinavian Journal of Information Systems, vol. 5, pp. 51-77,
1993.
Tolvanen, J.-P., Lyytinen,
K., Modeling Information Systems in Business Processing: Alternative
perspectives on business process re-engineering, Proceedings of the IFIP
TC8 Open Conference on Business Process Re-engineering: Information Systems
Opportunities and Challenges, Glasson et al. (eds.), Gold Coast, Queensland,
Australia, May 8-11, 1994.
Tolvanen, J.-P., Marttiin,
P., Smolander, K., An Integrated Model for Information Systems Modeling,
in Procs. of the 26th annual Hawaii International Conference on Systems
Science vol. 3, Nunamaker. et al. (eds.), IEEE Computer Society Press,
USA, pp. 470-479, January 1993.
Tolvanen, J.-P., Methodology
engineering in CASE: towads an incremental approach, Licentiate thesis,
Computer Science and Information Systems Reports TR-5, University of Jyväskylä,
1994.
Tolvanen, J.-P., Rossi,
M., Liu, H., "Method Engineering: Current research directions
and implications for future research", Method Engineering, Principles
of Method Construction and Support. S. Brinkkemper, K. Lyytinen and R.
Welke, Chapman-Hall: 296-317, 1996.
Tolvanen, J.-P., Rossi,
M., Marttiin, P., Comparison
of Three Object-Oriented Methods; a Method Adaptation Perspective, in CASE
for Object-Oriented Methods - Position papers of the ECOOP'92 WorkShop
W3, M. Rossi (ed.), Working Paper WP22, Department of Computer Science
and Information Systems, University of Jyväskylä, Finland, pp.
38-43, 1992.
Tolvanen, J.-P., M. Jarke, K.
Pohl, K. Weidenhaupt, K. Lyytinen,
P. Marttiin, Meta modeling:
A formal basis for interoperability and adaptability. In: Information Systems
Interoperability (eds. B. Krämer et al). John Wiley and Sons, 1998.
Tolvanen, J.-P., K. Lyytinen,
P. Marttiin, M. Jarke, K. Pohl,
K. Weidenhaupt, CASE Environment Adaptability: Bridging the Islands
of Automation", Proceedings of the 8th Annual Workshop on Information
Technologies and Systems (WITS’98) (eds. S. March, J. Bubenko), Computer
Science and Information System Reports, TR-19, University of Jyväskylä,
pp. 115-126, 1998.
Tolvanen, J.-P., Incremental
Method Engineering with Modeling Tools: Theoretical Principles and Empirical
Evidence" (Phd thesis), Jyväskylä Studies in Computer Science,
Economics and Statistics, Jyväskylä: University of Jyväskylä,
p. 301, 1998.
Zhang, Z., Methodology Engineering
Based Component Reuse in a MetaCASE Environment. Master Thesis, University
of Jyväskylä, Jyväskylä, Finland, 1998.
Home Page
Pages created originally by Steven Kelly. Last
update September 20, 1999 by Koskinen and Jouni Huotari.